Photography coming soon

Keg Beer Outlet Adaptor (BRASS)

£10.99

Keg Beer Outlet Adaptor (BRASS) — in brass.

Dispatched next working day
SKU: A1-JOG-062 Category:

Description

Keg Beer Outlet Adaptor (BRASS) — in brass.

Made in Brass according to the supplier’s own listing.

Push-fit fittings join beer and gas line without tools: the tube pushes into the collet, grips, and seals, and releases again by pressing the collar in and pulling the tube out.

Specification

Material Brass

Every figure above is stated by the supplier in the product name. Where a dimension is not listed we have not been given it — ask and we will confirm before you order.

Before you order

  • Sizes refer to the tube’s OUTSIDE diameter, not the bore
  • Cut the tube square — an angled cut is the usual reason a joint weeps
  • Push fully home, then pull back to check the collet has gripped

There is a fuller explanation of how to choose on the john guest fittings page.

Specification

Material Brass

Reviews

There are no reviews yet.

Be the first to review “Keg Beer Outlet Adaptor (BRASS)”

Your email address will not be published. Required fields are marked *

Questions about this product

Is a 3/8 fitting the same as 3/8 bore tube?

No, and this is the most common ordering mistake. Push-fit sizes describe the outside diameter of the tube. Check what your existing line actually measures across the outside before ordering.

Why is my push-fit joint leaking?

Usually the tube was cut at an angle, or it was not pushed fully home. Take it apart, cut the end square with a proper tube cutter, and push it in until it stops.

Can push-fit fittings be reused?

Yes, that is the point of them. They are designed to be disconnected and remade. If a fitting has been remade many times and starts to weep, replace it u2014 the collet and O-ring are the parts that age.

Related products