Description
1/2″ Hose Tail to 15ml Stem — a 1/2 thread and taking 15ml tube.
The thread is stated as 1/2, so check what is already on the line before ordering — a fitting one size out will not seal, however close it looks.
Push-fit fittings join beer and gas line without tools: the tube pushes into the collet, grips, and seals, and releases again by pressing the collar in and pulling the tube out.
Specification
| Thread / size | 1/2 |
|---|---|
| Stem / tube size | 15ml |
Every figure above is stated by the supplier in the product name. Where a dimension is not listed we have not been given it — ask and we will confirm before you order.
Before you order
- Sizes refer to the tube’s OUTSIDE diameter, not the bore
- Cut the tube square — an angled cut is the usual reason a joint weeps
- Push fully home, then pull back to check the collet has gripped
There is a fuller explanation of how to choose on the john guest fittings page.
Specification
| Thread / size | 1/2 |
|---|---|
| Stem / tube size | 15ml |
Reviews
There are no reviews yet.