Photography coming soon

15mm Equal Push Fit Elbow

£6.99

15mm Equal Push Fit Elbow

Dispatched next working day
SKU: A1-JOG-021 Category:

Description

15mm Equal Push Fit Elbow

Stated as 15mm. Measure across the outside of your existing tube — the bore is a different number and mixing the two is the usual reason a joint weeps.

Push-fit fittings join beer and gas line without tools: the tube pushes into the collet, grips, and seals, and releases again by pressing the collar in and pulling the tube out.

Specification

Tube / bore 15mm

Every figure above is stated by the supplier in the product name. Where a dimension is not listed we have not been given it — ask and we will confirm before you order.

Before you order

  • Sizes refer to the tube’s OUTSIDE diameter, not the bore
  • Cut the tube square — an angled cut is the usual reason a joint weeps
  • Push fully home, then pull back to check the collet has gripped

There is a fuller explanation of how to choose on the john guest fittings page.

Specification

Tube / bore 15mm

Reviews

There are no reviews yet.

Be the first to review “15mm Equal Push Fit Elbow”

Your email address will not be published. Required fields are marked *

Questions about this product

Is a 3/8 fitting the same as 3/8 bore tube?

No, and this is the most common ordering mistake. Push-fit sizes describe the outside diameter of the tube. Check what your existing line actually measures across the outside before ordering.

Why is my push-fit joint leaking?

Usually the tube was cut at an angle, or it was not pushed fully home. Take it apart, cut the end square with a proper tube cutter, and push it in until it stops.

Can push-fit fittings be reused?

Yes, that is the point of them. They are designed to be disconnected and remade. If a fitting has been remade many times and starts to weep, replace it u2014 the collet and O-ring are the parts that age.

Related products